Studies on Temperature and Strain Sensitivities of a Few-mode Critical Wavelength Fiber Optic Sensor

This paper studied the relationship between the temperature/strain wavelength sensitivity of a fiber optic in-line Mach-Zehnder Interferometer (MZI) sensor and the wavelength separation of the measured wavelength to the critical wavelength (CWL) in a CWL-existed interference spectrum formed by interference between LP01 and LP02 modes. The in-line MZI fiber optic sensor has been constructed by splicing a section of specially designed few-mode fiber (FMF), which support LP01 and LP02 modes propagating in the fiber, between two pieces of single mode fiber. The propagation constant difference, Δβ, between the LP01 and LP02 modes, changes non-monotonously with wavelength and reaches a maximum at the CWL. As a result, in sensor operation, peaks on the different sides of the CWL then shift in opposite directions, and the associated temperature/strain sensitivities increase significantly when the measured wavelength points become close to the CWL, from both sides of the CWL. A theoretical analysis carried out has predicted that with this specified FMF sensor approach, the temperature/strain wavelength sensitivities are governed by the wavelength difference between the measured wavelength and the CWL. This conclusion was seen to agree well with the experimental results obtained. Combining the wavelength shifts of the peaks and the CWL in the transmission spectrum of the SFS structure, this study has shown that this approach forms the basis of effective designs of high sensitivity sensors for multi-parameter detection and offering a large measurement range to satisfy the requirements needed for better industrial measurements

GRB afterglows: deep Newtonian phase and its application

Gamma-ray burst afterglows have been observed for months or even years in a few cases. It deserves noting that at such late stages, the remnants should have entered the deep Newtonian phase, during which the majority of shock-accelerated electrons will no longer be highly relativistic. To calculate the afterglows, we must assume that the electrons obey a power-law distribution according to their kinetic energy, not simply the Lorentz factor.Comment: Poster at the 4th workshop "Gamma-Ray Bursts in the Afterglow Era" (Rome, 2004), accepted for publication in the proceedings. 4 pages, with 3 figures inserte

Beaming effects in GRBs and orphan afterglows

The overall dynamical evolution and radiation mechanism of $\gamma$-ray burst jets are briefly introduced. Various interesting topics concerning beaming in $\gamma$-ray bursts are discussed, including jet structures, orphan afterglows and cylindrical jets. The possible connection between $\gamma$-ray bursts and neutron star kicks is also addressed.Comment: 10 Pages, 4 figures, to appear in a special issue of ApSS. Oral report presented at "The Multiwavelength Approach to Unidentified Gamma-Ray Sources" (Hong Kong, June 1 - 4, 2004; Conference organizers: K.S. Cheng and G.E. Romero

Microscopic description of octupole shape-phase transitions in light actinides and rare-earth nuclei

A systematic analysis of low-lying quadrupole and octupole collective states is presented, based on the microscopic energy density functional framework. By mapping the deformation constrained self-consistent axially symmetric mean-field energy surfaces onto the equivalent Hamiltonian of the $sdf$ interacting boson model (IBM), that is, onto the energy expectation value in the boson condensate state, the Hamiltonian parameters are determined. The study is based on the global relativistic energy density functional DD-PC1. The resulting IBM Hamiltonian is used to calculate excitation spectra and transition rates for the positive- and negative-parity collective states in four isotopic chains characteristic for two regions of octupole deformation and collectivity: Th, Ra, Sm and Ba. Consistent with the empirical trend, the microscopic calculation based on the systematics of $\beta_{2}$-$\beta_{3}$ energy maps, the resulting low-lying negative-parity bands and transition rates show evidence of a shape transition between stable octupole deformation and octupole vibrations characteristic for $\beta_{3}$-soft potentials.Comment: 18 pages, 18 figures, 1 tabl

Tailoring pH-responsive acrylic acid microgels with hydrophobic crosslinks for drug release

Amphiphilic microgels based on the hydrophilic acrylic acid (AA) and hydrophobic crosslinks of different compositions were synthesised using a lab-on-a-chip device. The microgels were formed by polymerising hydrophobic droplets. The droplets were generated via a microfluidic platform and contained a protected form of AA, a hydrophobic crosslinker (ethylene glycol dimethacrylate, EGDMA) and a free radical initiator in an organic solvent. Following photopolymerisation and subsequent hydrolysis, AA based microgels of amphiphilic nature were produced and it was demonstrated that they can successfully deliver both hydrophilic as well as hydrophobic moieties. The model drug delivery and the swelling ability of the microgels were influenced by the pH of the aqueous solution as well as the crosslinking density and hydrophobic content of the microgels

Microfluidically fabricated pH-responsive anionic amphiphilic microgels for drug release

© 2016 The Royal Society of Chemistry. Amphiphilic microgels of different composition based on the hydrophilic, pH-responsive acrylic acid (AA) and the hydrophobic, non-ionic n-butyl acrylate (BuA) were synthesised using a lab-on-a-chip device. Hydrophobic droplets were generated via a microfluidic platform that contained a protected form of AA, BuA, the hydrophobic crosslinker, ethylene glycol dimethacrylate (EGDMA), and a free radical initiator in an organic solvent. These hydrophobic droplets were photopolymerised within the microfluidic channels and subsequently hydrolysed, enabling an integrated platform for the rapid, automated, and in situ production of anionic amphiphilic microgels. The amphiphilic microgels did not feature the conventional core-shell structure but were instead based on random amphiphilic copolymers of AA and BuA and hydrophobic crosslinks. Due to their amphiphilic nature they were able to encapsulate and deliver both hydrophobic and hydrophilic moieties. The model drug delivery and the swelling ability of the microgels were influenced by the pH of the surrounding aqueous solution and the hydrophobic content of the microgels

Is GRO J1744-28 a Strange Star?

The unusal hard x-ray burster GRO J1744-28 recently discovered by the Compton Gamma-ray Observatory (GRO) can be modeled as a strange star with a dipolar magnetic field $\le 10^{11}$Gauss. When the accreted mass of the star exceeds some critical mass, its crust may break, resulting in conversion of the accreted matter into strange matter and release of energy. Subsequently, a fireball may form and expand relativistically outward. The expanding fireball may interact with the surrounding interstellar medium, causing its kinetic energy to be radiated in shock waves, producing a burst of x-ray radiation. The burst energy, duration, interval and spectrum derived from such a model are consistent with the observations of GRO J1744-28.Comment: Latex, has been published in SCIENCE, Vol. 280, 40